You have no items in your shopping cart.
Welcome to 7G SPORTS!
We offer you
In order to fly you will need for:
The XuGong v2/Pro was designed by FPV pilots for FPV pilots.
Designed for fully immersive flight, delivering high-quality, stabilized video footage, from a tailor-made aerial platform.
A fully integrated Power Distribution Board includes an EzOSD-based On-Screen-Display, with all of the critical flight data displayed.
Not only is battery voltage, current, and mAh consumed displayed, but also a continuously updated estimate of remaining flight time.
With a newly released EzUHF firmware revision, all critical uplink status is sent down the single PPM stream. No need for a second ‘i2c’ link between the receiver and the OSD.
A built-in camera switch, with automatic fail-over in case a camera fails.
The XuGong was designed to feel quite at home in a small backpack. A backpack to be taken on the ski-lift, carried up to a remote tropical island, or carried in a carry-on bag for the occasional international flight.
A remotely piloted camera that doesn’t require two pilots, nor a shipping container to transport it around.
The XuGong v2/Pro transmits all on-board telemetry to the ground, using the A/V down-link.
Battery status, Uplink status (RSSI, Link quality, etc.), GPS position, are all available in the telemetry stream.
The ImmersionRC Antenna Trackers can use this data to point a high-gain antenna directly at the model.
The iTelemetry dongle provides an interface between this telemetry feed, and a smartphone/tablet, with applications available for the iOS and Android devices.
The XuGong’s beautiful CNC-milled foldable arms include an intentional break-away pin. This pin takes the brunt of the occasional hard landing, and can be easily replaced in the field.
For even harder landings (we sometimes call them crashes), the milled arms bend, without breaking, and may be gently bent back into shape without leaving the mountain-top, or tropical beach. Try to do this with cheap plastic alternatives…
Gewicht | ~ 1.5kg (RTF) |
---|---|
Country of Manufacture | China |
Manufacturer | ImmersionRC |
Suggested environment | Outdoor |
Maximum flight time | 20min |
Gyro | No |
GPS | No |
Completion level | No |
Ports |
|
Technical specs |
|
Delivery time | preorder |
Published date | Dec 31, 2014 |
Dimensions | 240mm (W) x 300mm (L) x 140mm (H) |
Before you start flying, please watch the movies to be more familiar with the kit and its usage.
Read the manual carefully before starting to operate. Go to XuGong v2/Pro Manual .
FIRMWARE
XuGong v2/Pro firmware v1.1 (ZIP, 63,5KB)
XuGong v2/Pro firmware v1.0 (ZIP, 62.1KB)
UTILITY SOFTWARE
ImmersionRCTools v.1.41.4 (ZIP, 3.2MB)
If you need any help or want to share anything, please contact us.
In order to fly you will need for:
The XuGong v2/Pro was designed by FPV pilots for FPV pilots.
Designed for fully immersive flight, delivering high-quality, stabilized video footage, from a tailor-made aerial platform.
A fully integrated Power Distribution Board includes an EzOSD-based On-Screen-Display, with all of the critical flight data displayed.
Not only is battery voltage, current, and mAh consumed displayed, but also a continuously updated estimate of remaining flight time.
With a newly released EzUHF firmware revision, all critical uplink status is sent down the single PPM stream. No need for a second ‘i2c’ link between the receiver and the OSD.
A built-in camera switch, with automatic fail-over in case a camera fails.
The XuGong was designed to feel quite at home in a small backpack. A backpack to be taken on the ski-lift, carried up to a remote tropical island, or carried in a carry-on bag for the occasional international flight.
A remotely piloted camera that doesn’t require two pilots, nor a shipping container to transport it around.
The XuGong v2/Pro transmits all on-board telemetry to the ground, using the A/V down-link.
Battery status, Uplink status (RSSI, Link quality, etc.), GPS position, are all available in the telemetry stream.
The ImmersionRC Antenna Trackers can use this data to point a high-gain antenna directly at the model.
The iTelemetry dongle provides an interface between this telemetry feed, and a smartphone/tablet, with applications available for the iOS and Android devices.
The XuGong’s beautiful CNC-milled foldable arms include an intentional break-away pin. This pin takes the brunt of the occasional hard landing, and can be easily replaced in the field.
For even harder landings (we sometimes call them crashes), the milled arms bend, without breaking, and may be gently bent back into shape without leaving the mountain-top, or tropical beach. Try to do this with cheap plastic alternatives…
Gewicht | ~ 1.5kg (RTF) |
---|---|
Country of Manufacture | China |
Manufacturer | ImmersionRC |
Suggested environment | Outdoor |
Maximum flight time | 20min |
Gyro | No |
GPS | No |
Completion level | No |
Ports |
|
Technical specs |
|
Delivery time | preorder |
Published date | Dec 31, 2014 |
Dimensions | 240mm (W) x 300mm (L) x 140mm (H) |
Before you start flying, please watch the movies to be more familiar with the kit and its usage.
Read the manual carefully before starting to operate. Go to XuGong v2/Pro Manual .
FIRMWARE
XuGong v2/Pro firmware v1.1 (ZIP, 63,5KB)
XuGong v2/Pro firmware v1.0 (ZIP, 62.1KB)
UTILITY SOFTWARE
ImmersionRCTools v.1.41.4 (ZIP, 3.2MB)
If you need any help or want to share anything, please contact us.