Settings for Scout X4
Model select: Model menu > Model Select (use an empty/not used one with DN button).
Model name: Model menu > Model name (use UP or DN buttons to select the desired character).
Type select: Model menu > Type select (select Airplane with R or L button).
Wing type: Model menu > Wing type (Wing type should be set to Normal).
Device output: Model menu > Device output
| Gear | MIX SW |
| Active | |
| Flap | RUDD D/R |
| Active | |
| AUX2 | ELEV D/R |
| Active | |
| AUX3 | FMOD SW |
| Active | |
| AUX4 | GEAR SW |
| Active | |
| AUX5 | AUX5 KB |
| Active | |
| AUX6 | AUX6 KB |
| Active | |
| AUX7 | AILE D/R |
| Active |
Voltage setting: Model menu > Sensor setting > (use UP/DN to navigate to) Voltage > ENT > External: V1 - Active, 21.4V. (Suggested 21.6V if you like to fly far away).
Reverse switch: Function menu > Reverse switch (all values on right should be set to Normal).
Servo travel adjust: Function menu > Travel adjust (all values set to 100% except Flap (U150.0% D150.0%), AUX3 (+5.0%, -100.0%, 5.0% means 5 meters radius for round flight).
Settings for TALI H500
Model select: Model menu > Model Select (use an empty/not used one with DN button).
Model name: Model menu > Model name (use UP or DN buttons to select the desired character).
Type select: Model menu > Type select (select Airplane with R or L button).
Wing type: Model menu > Wing type (Wing type should be set to Normal).
Device output: Model menu > Device output
| Gear | MIX SW |
| Active | |
| Flap | RUDD D/R |
| Active | |
| AUX2 | ELEV D/R |
| Active | |
| AUX3 | FMOD SW |
| Active | |
| AUX4 | GEAR SW |
| Active | |
| AUX5 | AUX5 KB |
| Active | |
| AUX6 | AUX6 KB |
| Active | |
| AUX7 | AILE D/R |
| Active |
Voltage setting: Model menu > Sensor setting > (use UP/DN to navigate to) Voltage > ENT > External: V1 - Active, 21.4V. (Suggested 21.6V if you like to fly far away).
Reverse switch: Function menu > Reverse switch (all values on right should be set to Normal).
Servo travel adjust: Function menu > Travel adjust (all values set to 100% except Flap (U150.0% D150.0%), AUX3 (+5.0%, -100.0%, 5.0% means 5 meters radius for round flight).
Settings for X350 PRO
Model select: Model menu > Model Select (use an empty/not used one with DN button).
Model name: Model menu > Model name (use UP or DN buttons to select the desired character).
Type select: Model menu > Type select (select Airplane with R or L button).
Wing type: Model menu > Wing type (Wing type should be set to Normal).
Device output: Model menu > Device output
| Gear | MIX SW |
| Active | |
| Flap | RUDD D/R |
| Active | |
| AUX2 | ELEV D/R |
| Active | |
| AUX3 | FMOD SW |
| Active | |
| AUX4 | GEAR SW |
| Active | |
| AUX5 | AUX5 KB |
| Active | |
| AUX6 | AUX6 KB |
| Active | |
| AUX7 | AILE D/R |
| Active |
Voltage setting: Model menu > Sensor setting > (use UP/DN to navigate to) Voltage > ENT > External: V1 - Active, 10.7V.
Reverse switch: Function menu > Reverse switch (all values on right should be set to Normal).
Servo travel adjust: Function menu > Travel adjust (all values set to 100% except Flap (U150.0% D150.0%), AUX3 (+5.0%, -100.0%, 5.0% means 5 meters radius for round flight).
Settings for X350
Model select: Model menu > Model Select (use an empty/not used one with DN button).
Model name: Model menu > Model name (use UP or DN buttons to select the desired character).
Type select: Model menu > Type select (select Airplane with R or L button).
Wing type: Model menu > Wing type (Wing type should be set to Normal).
Device output: Model menu > Device output
| Gear | MIX SW |
| Active | |
| Flap | FMOD SW |
| Active | |
| AUX2 | AUX6 KB |
| Active | |
| AUX3 | RUDD D/R |
| Active | |
| AUX4 | AUX4 KB |
| Active | |
| AUX5 | AUX5 KB |
| Active | |
| AUX6 | AUX6 KB |
| Active | |
| AUX7 | AUX7 KB |
| Active |
Voltage setting: Model menu > Sensor setting > (use UP/DN to navigate to) Voltage > ENT > External: V1 - Active, 9.6V.
Reverse switch: Function menu > Reverse switch (all values on right should be set to Normal).
Servo travel adjust: Function menu > Travel adjust (all values set to 100%).
